How to use CapNYS

The Dialog to input ID-number

At starting or pussing the record button, the Dialog like a upper-left figure comes out.
The history of the IDs are shown, you can choose the one by mouse-click or up-down arrow keys. You can also input the new number within 8 digits.
Close the dialog and the recording screen like a up-right figure appears. ID-number is shown at left-low corner, date-time at right-low corner and head-animation at left-upper corner which shows head-positions.
With an initial setting, the folder for saving videos is subfolder "gazou".
With the upper figure case, the recorded video is saved in "gazou" as the file name below.
0001234520190220155505.wmv　
The folder for saving video can be changed from the [Set saving folder] of the "MENU". If you already have video files, move them to the new folder as well and restart the program. After restarting, the list file of saved videos (CapNYS2list.txt) will be recreated and you will be able to view the video files from the program.
The camera found first is choosing. If your PC has some cameras, please choose the [ Camera Device ] of "MENU".

Head position input mode Selection

Head position input mode can be selected from the menu button during recording. The current input mode is displayed above the menu button. You can choose from 4 types: Manual, M5StickCPlus, Arduino_MPU6050, iPhone_gyrOSC. For M5StickCPlus and Arduino_MPU6050 also select COM port.
When using the sensor, you need to adjust the orientation of the gyro. Select the Direction (1-8) value for manual synchronization of goggle movement and head position animation.

You can select a camera from the menu button. If you set the IP_Camera address, you can select the IP_camera.

Manual head positions input mode

You can change the head position mark (blue arrow) displayed in the upper left corner of the head position animation with the sitting position and supine position mark change button (same for the space key) indicated by the red arrow.

How to input head positions mannualy

The video screen is separated 9 fields. By clicking or touching one of the 9 fields, you can changed the head-positions animation as the 9 kinds like the upper right chart. You can also set the head-position animations by ten-key board. If you don't have ten-key board you can use [789uiojkl] keys.

Auto head position input mode( M5StickCPlus)

If you install AxisOrange on M5StickCPlus, you can enter the head position via Bluetooth. AxisOrange can be written to M5StickCPlus by installing VSCode (Visual Studio Code) on WindowsPC (or Mac) and installing PlatformIO IDE from the extension.

Auto head position input mode (Arduino_MPU6050)

The motion sensor unit only joined Arduino to MPU-6050 is easy to make. You can see the way of making the unit at the page below.
How to make motion sensor unit

Auto head position input mode( cell phone)

Gyro of iPhone or Android can be used. You need to install an app named (iCapNYS, aCapNYS). Follow the instructions to set the IP_address and port number to them.

PlayBack mode

A playback screen is displayed at the center. It stops and restart by the click of a playback screen. The fast forwarding rewinding is made of the maneuver of a slide bar under a blayback screen. You can use arrow keys to handle playback the video.
If there are the videofiles of the same ID number, they are shown to a right frame list box.
The reference videos are in the left frame list box. By the right-clicking the current playback video you can register the video to the left reference list box.
Two yellow triangle at the both sides on the slide bar can be move by dragging. Set the both triagle marcs and push the upper-right trimming button then you can save the video of the range which the two marcs show.

Buttons on Playback mode

The upper-left [MEMO] button: set the memo of the selected file of the left list box.
[ID] button: change the current ID number.
[REC] button: move into Recording mode.
[LIST] button: move into All saved files listing mode.
[TRIM] button:save the range of the video between two yellow triangle marcs.

All saved videos Listing mode

It is possible to sort with [ID], [Date], [size], [memo] and [full path] by clicking them of the list box.
[MEMO] button: set the memo of the selected file of the left list box.
[ID/change] button: change the ID of the selected video file.
[SAVE] button: save the copy of the selected file as another name.
[BACKUP] button: backup the videos on the sertain dates. You need to set the BackUpFolder for backup.
[Set BackUpFolder] button: set the folder for backup.

sample of date setting.
2019???? :
from 2019/1/0 to 2019/12/31
201901?? :
from 2019/1/0 to 2019/1/31
2019012? :
from 2019/1/20 to 2019/1/29

The figure on the left shows the pop-up menu that appears when you click the menu button in the All saved videos Listing mode.

[Set the saving folder]:
The folder for saving videos can be changed. If you already have videos, move them to the new folder as well and restart the program. After restarting, the list file of saved videos (CapNYS2list.txt) will be recreated and you will be able to view the video files from the program.
[Make the listfile of videos]
CapNYS2list.txt is automatically created and updated. Please do this when the list display is disturbed. If you delete CapNYS2list.txt, this file will be created at startup. It is also created when the save folder is changed.

Right clicked popupMenu

By right-clicking each item in each mode, a pop-up menu like the one on the left will appear. The figure on the left is the menu that appears when you right-click the list box of the current ID.
The content of the menu that appears depends on the item that you right-click.